| Home | PDF Downloads | Testimonials | Contact Us | |||||
|
|||||
|
|
|
|
|
|
| |||||
Mercury
For mercury removal from gas streams, APC offers three product lines: MercPure
Fixed Bed (FB) Series systems, MercPure powdered activated carbon (PAC)
Series systems, and MercPure moving bed (MB) Series systems.
MercPure FB Series Systems APC’s MercPure Fixed Bed (FB Series) systems provide the highest removal efficiencies for mercury using fixed adsorption beds of specialty, granular activated carbon media that are custom-selected for the application. APC’s activated carbon media for these systems are available to address both low- and high-temperature exhaust gas streams. APC is media-independent and will select the best media available on the market for the application. APC’s patent pending Ultra High-Efficiency Filter (UHF®) unit can precede the adsorption vessel(s) to remove ultra-fine condensed and solid particulate down to and below 0.01 micron in size, greatly extending carbon media life, and allowing continuous mercury control at high efficiency. MercPure PAC Series Systems APC’s MercPure powdered activated carbon (PAC Series) injection systems include carbon metering and injection systems, interconnecting ductwork and piping, and downstream fabric filter (if not already in place) to deliver mid to high removal efficiencies (up to 95% typ.). These systems also work in both low- and high-temperature conditions and are ideal for larger gas volumetric flow rates where fixed adsorption beds become infeasible. MercPure MB Series Systems APC’s MercPure Moving Bed (MB Series) systems utilize patent-pending technology employing unique mercury adsorption media to deliver mid-range removal efficiency for mercury at very low capital and operating costs. The MB Series system offers the lowest pressure drop available. The MB Series can be ideal where a polishing stage is required for moderate reduction of mercury emissions. Applications for MercPure Series systems include: hospital waste incinerators, municipal waste incinerators, waste-to-energy plants, wastewater treatment plants (sludge incinerators), fossil fuel fired boilers, retort furnaces, fluorescent bulb manufacturing, chlor-alkali plants, taconite plants, chemical plants, and specialty refineries. |
||
|
APC Technologies, Inc. • One Altoona Place •
Pittsburgh, PA 15228 P: 877.464.2728 • Outside US: 412.344.1870 • Fax: 412.531.4889 • E-mail: info@apctechnologies.net |
|
| ©2009 APC Technologies, Inc. | Site Design: Jeffrey D. Morgan Photography & Design |